EN
Wholesale TJ0500 Gas Jet Burner Nozzles Industrial Burners for Steam Boilers New Condition for Manufacturing Plants
Generally speaking, the working conditions of ignition burners are relatively bad. They are easily subjected to high temperature radiation and flame scouring in the furnace for a long time, which can easily cause creep, high temperature deformation and damage. At the same time, some ignition burners have special working environment requirements: such as high positive pressure environment, high negative pressure environment, high airflow environment, high cold environment, special fuel environment, etc., which all need to be able to ignite reliably, burn stably, and have a certain flame rigidity. To ensure the ignition of the main combustion equipment
Description
Parameter |
Burner Velocity |
Model TJ0150 |
Model TJ0200 |
|
Max input, Btu/hr (KW) |
Medium / High velocity |
1,500,000(400) | 2,000,000(586) | |
Min input, Ratio regulated Btu/hr (KW) |
Medium / High velocity | 150,000(44) | 200,000(59) | |
Min input, Fixed air Btu/hr (KW) |
Medium / High velocity | 30,000(9) | 40,000(12) | |
|
Main Gas Inlet Pressure, "w.c. (mbar) Fuel pressure at gas inlet |
High velocity | Natural gas | 14.5(36.0) | 9.3(23.0) |
Propane |
15.0(38.0) | 12.7(32.0) | ||
Butane |
15.5(39.0) | 13.4(34.0) | ||
| Medium velocity | Natural gas | 7.0(17.5) | 7.1(18.0) | |
| Propane | 6.0(15.0) | 8.5(21.0) | ||
| Butane | 6.5(16.0) | 6.9(17.0) | ||
|
Air Inlet Pressure, "w.c. (mbar) 15% excess air at maximum input |
High velocity | Natural gas | 17.5(44.0) | 12.3(31.0) |
| Propane | 19.5(49.0) | 14.1(35.0) | ||
| Butane | 19.5(49.0) | 14.1(35.0) | ||
| Medium velocity | Natural gas | 9.5(24.0) | 10.0(25.0) | |
| Propane | 10.0(25.0) | 11.0(28.0) | ||
| Butane | 10.5(26.0) | 11.0(28.0) | ||
|
High Fire Visible Flame Length, inches (mm) Measured from the outlet end of the combustor |
High velocity | Natural gas | 38(965) | 27(685) |
| Propane | 42(1065) | 30(760) | ||
| Butane | 43(1090) | 30(760) | ||
| Medium velocity | Natural gas | 43(1090) | 36(915) | |
| Propane | 42(1065) | 32(810) | ||
| Butane | 44(1120) | 32(810) | ||
|
Approximate Flame Velocity, ft/s (m/s) Approximately 15% excess air at maximum input |
High velocity | 500(152.4) | 500(152.4) | |
| Medium velocity | 250(76.2) | 250(76.2) | ||
| Flame Detection | UV scanners only (Can be used with all combustors) | |||
| Fuel |
Natural gas, propane, butane For any other mixed gas, contact our company. |
|||
• All information is based on laboratory testing in neutral (0 "w.c., 0 mbar) pressure chamber. Different chamber
conditions may affect the data.
• All information is based on standard combustor design. Changes in combustor will alter performance and pressures.
• All inputs are calculated according to the high calorific value of the fuel.
• Our company reserves the right to change the construction and/or configuration of our products at any time without
being obliged to adjust earlier supplies accordingly.
• Plumbing of air and gas will affect accuracy of orifice readings. All information is based on generally acceptable air
and gas piping practices.
